Cost comparison between barn with structural elements made of concrete and metal shed with roof truss and precast abutments for the Sinop-MT

Autores

  • K. A. F. Miranda
  • E. F. Souza
  • P. B. Philippsen

DOI:

https://doi.org/10.36560/932016266

Palavras-chave:

ASTM A36 steel, pre-molding, building systems

Resumo

The purpose of this article it was show a cost comparative between two constructive methods employed in sheds in the city of Sinop-MT, constructed with precast beams of armed concrete and structural system of the roofs varying between metalic trellis and precast concrete beams. For this, it was created a standard project, with the same architetonic dimensions, being dimensioned all elements for both methods. To the elaborationof the structural projects were followed cauculation scripts always with the assistence of the softwares VisualVentos, Ftool, DimPerfil and Superporticos, like the current norms. As a result the two buildings studied showed numerous differences, both in costs as in structural features, having a big variation in the self weight of approximately  47%. As element wich made this comparative relevant, stands out that the roof system of the shed with metalic structure had a variation of 173% when compared with the competitor shed. Thus, the constructive system, where all the parts were made of concrete, showed a cost variation of 52% to minus when compared to the competing system, were ignored in the quantitative elements outside the structure in which both were equal.

Referências

ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TECNICAS. NBR-6118/2003: Projeto de estruturas de concreto. Rio de Janeiro,2001.

______. NBR-6120/1988: Cargas para o cálculo de estruturas de edificações. Rio de Janeiro, 2011.

______. NBR-6122/88: Projeto e execução de fundações. Rio de Janeiro, 1988.

______. NBR-6123/88: Forças devidas ao vento em edificações. Rio de Janeiro, 1988.

______. NBR-8800/08: Projeto e execução de estruturas de aço de edifícios.Rio de Janeiro, 2008.

______. NBR-9062/2007: Projeto e execução de estruturas de concreto pré-moldado.Rio de Janeiro, 2007.

______. NBR-14762/2001: Dimensionamento de estruturas de aço constituídas por perfis formados a frio - Procedimento. Rio de Janeiro, 2001.

ABCIC, Associação Brasileira da Construção Industrializada de Concreto. Anuário abcic 2011 – edição especial. Donwload de (http://www.abcic.org.br/boletins.asp) em 27 outubro de 2012. Rio de Janeiro, 2008. 119p.

ARAÚJO, J. M. Curso de concreto armado. Vol. 1, 3 ed. Rio grande, Ed. Dunas, 2010.

BELLEI, I. H. Edifícios industriais em aço projeto e cálculo. 5 ed.Ed. PINI. São Paulo 2008.

BOTELHO, M. H. C.; MARCHETTI, O. Concreto armado eu te amo. Vol. 1, 6 ed. ver. amp. Ed. Blucher, São Paulo, 2010.

D’ALAMBERT, F. Galpões em pórticos com perfis estruturais laminados. Coletânea do uso do aço. Vol. 3, 3 Ed, 2005.

EL DEBS, M. K. Concreto pré-moldado : fundamentos e aplicações.São Carlos, SP, Ed. EESC – USP, 2000.

GONZÃLES, M. A. S. Noções de Orçamento e Planejamento de Obras. São Leopoldo, 2008. 49 p.

IBGE, Instituto Brasileiro de Geografia e Estatística. Censo 2010. Download de (http://www.ibge.com.br/home/estatistica/populacao/censo2010/default.shtm) em 02 de outubro de 2012.

JUCEMAT – Junta Comercial do Estado de Mato Grosso. Download de (http://www.jucemat.mt.gov.br/) em 23 de outrubro de 2012.

MELO, C.E.E. Manual Munte de projetos em pré-fabricados de concreto/Munte Construções Industrializadas. 2 ed. rev. e ampl. 015 – Ed. PINI, São Paulo, 2007.

PANNONI, F. D. Aços estruturais. Associação Brasileira de Metalurgia e Materiais – ABM. 7 ed. 2002. p.22.

PRAVIA, Z. M. C.; DREHMER, G.A; JÚNIOR, E, M. Galpões para usos gerais/ Instituto aço Brasil 4 ed.rev. Rio de Janeiro. Editora IABr/CBCA ,2010. 74p.

PINHEIRO, Antonio C. F B. Estruturas metálicas, cálculos, detalhes, exercícios e projetos. São Paulo: Edgard Blucher, 2005.

PINHEIRO, Libânio Miranda. Concepção Estrutural, SET 863 – Fundamentos do Concreto II. São Carlos, 1999.

PUGLIESI, M; LAUAND, C. A. Estruturas metálicas. Ed. Hemus, 2005

SILVA, E. L.; SILVA, V. P. Dimensionamento de perfis formado a frio conforma NBR 14762 e NBR 6355. Instituto Brasileiro de siderurgia / Centro Brasileiro de Construção em aço.

TISAKA, M. Orçamento na Construção Civil: consultoria, projeto e execução. 1. ed. São Paulo: Editora Pini, 2006. Reimpressão 2007. 367 p.

Tabela Sinapi, Mato Grosso, Indice da construção civil, Agosto, 2012.

TISOT, G. D. D.; MEDEIROS, G. F.; KRIPKA, M. Estudo de treliças metálicas para cobertura em duas águas através de otimização topológica. Congresso Latino-Americano da Construção metálica. São Paulo, 2010.

Downloads

Publicado

2016-07-15

Como Citar

Miranda, K. A. F., Souza, E. F., & Philippsen, P. B. (2016). Cost comparison between barn with structural elements made of concrete and metal shed with roof truss and precast abutments for the Sinop-MT. Scientific Electronic Archives, 9(3), 122–135. https://doi.org/10.36560/932016266

Edição

Seção

Ciências Exatas e Engenharias

Artigos mais lidos pelo mesmo(s) autor(es)