Thermal analysis of brake system components from low-lift vehicle
DOI:
https://doi.org/10.36560/1242019906Palavras-chave:
Energy. Comfort. Safety. ExperimentResumo
The objective of this work was to analyze the brake system of the prototype developed by UFV, using sensors and software as a source of obtaining of data. The low-profile off-road prototype must have a high working capacity on low-lift, sloping and irregular terrain, always complying with SAE Brazil's safety regulations and regulations. The methodology used was the determination of theoretical maximum temperatures and the characterization of thermal braking energies by experimental method. The presented results confirm that the pre-established conditions were actually met in order to promote the optimization of the related systems. It is concluded that the brake system used in the project meets the temperatures ranges considered safe for its good functioning
Referências
Boz, M., Kurt A., The effect of Al2O3 on the friction performance of automotive brake friction materials. J Tribo Int, 2007 40(7):1161–1169. doi:10.1016/j.triboint.2006.12.004
Dufrénoy, P., Two-/three-dimensional hybrid model of the thermomechanical behavior of disc brakes. J Rail Rapid Transit Part F, 2004 218:17–30. doi:10.1243/095440904322804402
Gao, C.H., Lin, X.Z., Transient temperature ï¬eld analysis of a brake in a non-axisymmetric three-dimensional model. J Mat Proc Tech, 2002 129:513–517. doi:10.1016/S0924-0136(02)00622-2
Johnson, D.A., Sperandei, B.A., Gilbert, R., Analysis of the flow through a vented automotive brake rotor. J Fluids Eng, 2003 125:979–986. doi:10.1115/1.1624426
Lee, K., Numerical prediction of brake fluid temperature rise during braking and heat soaking. SAE, International Congress and Exposition Detroit, Michigan, 1999 1–4 March. URL: http:// delphi.com/pdf/techpapers/1999-01-0483.PDF
LIMPERT, R. Brake Design and Safety. 2ª edição. Editora SAE USA 1999.
McPhee, A.D., Johnson, D.A., Experimental heat transfer and flow analysis of a vented brake rotor. Int J Thermal Sci, 2007 47(4):458–467. doi:10.1016/j.ijthermalsci.2007.03.006
Mosleh, M., Blau, P.J., Dumitrescu, D., Characteristics and morphology of wear particles from laboratory testing of disk brake materials. J Wear, 2004 256:1128–1134.
doi:10.1016/j.wear. 2003.07.007
Mutlu, I., Alma, M.H., Basturk, M.A., Preparation and characterization of brake linings from modiï¬ed tannin-phenol formaldehyde resin and asbestos-free ï¬llers. J Mat Sci, 2005 40(11): 3003–3005. doi:10.1007/s10853-005-2396-7
Ostermeyer, G.P., On the dynamics of the friction coefï¬cient. J Wear, 2001 254(9):852–858. doi:10.1016/S0043-1648(03) 00235-7
Talati, F., Jalalifar, S., Analysis of heat conduction in a disk brake system. Heat Mass Transfer, (2009) 45:1047–1059.
doi: 10.1007/s00231-009-0476-y
Valvano, T., Lee, K., An analytical method to predict thermal distortion of a brake rotor. SAE, World Congress, Detroit, Michigan, 2000 6–9 March. URL: http://www.sae.org/technical/papers/ 2000-01-0445
Wallis, L., Leonardi, E., Milton, B., Joseph, P., Air flow and heat transfer in ventilated disk brake rotors with diamond and tear-drop pillars. Numerical Heat Transf Part A, 2002 41:643–655.
Yevtushenko, A., Chapovska, R., Effect of time-dependent speed on frictional heat generation and wear in transient axisymmetrical contact of sliding. Arch Appl Mech, 1997 67:331–338. doi:10.1007/s004190050121
Downloads
Publicado
Como Citar
Edição
Seção
Licença
A revista se reserva o direito de fazer alterações nas regras originais, na ortografia e na ordem gramatical, a fim de manter o idioma de culto padrão, respeitando, no entanto, o estilo dos autores. Os artigos publicados são de propriedade da revista Scientific Electronic Archives, tornando-se sua reimpressão total ou parcial, sujeitos à autorização expressa da direção da revista. A fonte original da publicação deve ser mantida. Os originais não serão devolvidos aos autores. As opiniões expressas pelos autores dos artigos são de sua exclusiva responsabilidade.
The journal reserves the right to make changes to the original rules, spelling and grammatical order, in order to keep the language of worship default, respecting, however, the style of the authors. Articles published are the property of Scientific Electronic Archives magazine, becoming its total or partial reprint, subject to the express authorization of the direction of the journal. The original source of publication should be retained. The originals will not be returned to the authors. Opinions expressed by authors of articles are solely your responsibility.
This journal uses the License Creative Commons Atribuição 4.0 Internacional.
